9 Inch Elastoform Uncured EPDM Tape

Sold per linear metre not per roll

Please enter quantity required in linear metres, i.e. for a 4 metre length, please enter 4 in the quantity field

In stock
£24.42 £20.35

Delivery From £15 for all Standard Flat Roofing Materials.

9 Inch Elastoform Uncured Tape

Used For: Designed to form internal / external corners / awkward features / pipes / penetrations / drain outlets and any other feature where the ability to stretch and form the material is required. 225mm uncured flashing can also be used to create an inexpensive pipe boot.

Installation Notes:The EPDM surfaces to receive the flashing must be dry, clean and free from dust and dirt. Wherever un-cured flashing tapes are to be used the surface must be primed with ClassicBond  Rubber Primer and allowed to dry (touch dry), smooth side down!

An Overview

SKU

CB-Tape09

Stock Type

Warehouse Fulfilled

Width

225mm (9")

Brand Name

ClassicBond

Material

Uncured Synthetic Rubber

Color

Black

Videos
Downloads
Questions & Answers (7)

What is The Life Expectancy of EPDM Rubber Roofs?

EPDM Rubber roofs have a 50 year life expectancy.

EPDM has been in commercial use since the 1960s. And many of those roofs are still around today. 

My roof has a small hole which is causing a leak, how easy is it to repair this?

One of the most evident benefits of EPDM rubber roofing is that it can be repaired very quickly and easily, allowing you to catch a problem before it turns into something much bigger! Supplied as a 6 inch strip, any small hole or rip can be sealed effectively with our repair patch kits. This easy-to-use patch, primer and brush combination will ensure you can safely patch any minor damage to the roof.
Link to the kit here!

Can EPDM Withstand Hard Impacts From Outside Conditions? Such As Branches Falling On It Or A Bird Pecking On It?

Along with a life expectancy of 50 years and beyond, EPDM rubber can stand up to quite some force from outside elements, in our video below we explore what different objects falling on the rubber will do to it and how much damage it takes to actually penetrate the membrane! Prepare to be surprised!

How Long Does It Take To Install A ClassicBond Pro Roof?

This will depend on the current substrate, size and type of roof; along with if there is any detail work required such as skylights.

Our friends over at RoofScout have made a great video showing you exactly how long it takes to install ClassicBond Pro on a freestanding, timber-boarded summer house.

For Sam, it took him just under 2 hours and 15 minutes. He did install this roof alone and installed edge trims which make a difference to the installation time.

Check out RoofScout's video below.

How Long Does It Take To Install A ClassicBond Roof?

Generally, installing a ClassicBond roof can be a very quick job if you have basic knowledge about the preparation and the correct steps to take.

Some factors will affect the installation time such as the current substrate, size and type of roof; along with if there is any detail work required such as skylights.

Our friends over at RoofScout have made a great video showing you exactly how long it takes to install ClassicBond on a freestanding, timber-boarded log cabin.

For Sam, it took him just under a 1hour and 30minutes. He did install this roof alone and installed edge trims which make a difference to the installation time.

Check out RoofScout's video below.

Is Classicbond EPDM BBA Certified?

Yes. ClassicBond EPDM holds the British Board of Agrément certificate, No. 11/4853, issued to Flex-R Ltd. The BBA carries out assessment, testing, approval and certification of products and systems for the construction industry against national requirements, internationally recognized standards or other relevant technical specifications, reviewed and reissued every 3 years.

Fire Ratings

The ClassicBond system is also fire rated, the 1.2mm EPDM has a fire rating of EXT.F.AB and the 1.5mm EPDM membrane is fire rated to EXT.F.AA. Fire rating is carried out on a variety of deck surfaces and it is important to seek the certificate that relates most accurately to your roof structure.

What Temperatures Can A Rubber Roof Be Installed In?

We recommentd a minimum tempereture of 5 degrees C for EPDM installation. This is due the the WBA adhesive being water based and lower temperetures may cause the adhesive to freeze over and fail. 

You might want these instead
Back to top