ClassicBond Pro PU Decking Adhesive 5 Litres
ClassicBond Pro Polyurethane (PU) Adhesive is a one component, moisture curing, high performance adhesive used to bond ClassicBond Pro EPDM polyester lined membranes to a range of substrates plywood, OSB, concrete, PIR/PUR tissue faced insulation, steel, existing bitumen layer etc. The adhesive is roller applied and cures by reacting with atmospheric conditions.
Features & Benefits
- Fast curing
- Superior Bond Strength
- Suitable for range of decks
Coverage: 0.25 Ltr / m2 when applied to both sides (depending on surfaces)
You might also need
If you’re buying for a new roof or replacing an old one, you will need to consider the following components in your roof kit...
- Edge Trims
How Long Does It Take To Install A ClassicBond Pro Roof?
This will depend on the current substrate, size and type of roof; along with if there is any detail work required such as skylights.
Our friends over at RoofScout have made a great video showing you exactly how long it takes to install ClassicBond Pro on a freestanding, timber-boarded summer house.
For Sam, it took him just under 2 hours and 15 minutes. He did install this roof alone and installed edge trims which make a difference to the installation time.
Check out RoofScout's video below.