Garden Room Roof Kits
Roof Kits for free-standing garden rooms where the gutter runs along the long edge.
Garden Room Roof Kit
Our Garden Room Kits are Designed to be used for free standing structures where the gutter is found along the longest edge. They are Easy to install, look great and have a life expectancy of up to 50 years! EPDM rubber membranes are UV, Ozone and Infrared stable so will not crack, blister or peel. We have put together a kit including the 1.2mm One-Piece EPDM rubber membrane, adhesives and edging trims.
Colour: Lead / Slate Grey
Used For: EPDM Rubber Roof for garden rooms and free standing structures.
Included in Kit:
- 1.2mm thick ClassicBond EPDM Membrane (Size as per roof kit chosen)
- Water based deck adhesive for bonding to the timber roof
- Contact Adhesive for bonding deck perimeter
- Sure Edge Kerb Edge Black for 3 sides
- Sure Edge Gutter Drip Edge Black for 1 long side
- 4 x Sure Edge External Kerb Edge corners Black
- 1 x Tool Kit (Scissors/Roller set/Mini roller)
- 1 x Installation Guide
- (All clips and pins are included for the trims)
WE CAN TAILOR THE KIT TO SUIT YOUR ROOF - CALL 0800 313 4486 TO DISCUSS
The Membrane size will be the same as the kit size. Therefore your roof size will need to be smaller to allow for edge overlaps. e.g. 6metre x 3metre roof kit will fit a roof that is no larger than 5.7metres x 2.7metres.
|Stock Type||Warehouse Fulfilled|
If its going to be a few weeks before you fit the roof, we would suggest unrolling the membrane and re-rolling it longways, this will help prevent any creases forming. The adhesives and trims need to be stored indoors before fitting, rather than leaving them outside, as they can be affected by temperature fluctuations. Check out our video below for a full explanation from Sam!
We sell a wide variety of EPDM rubber flat roofing kits to our customers and try to provide the widest possible selection, with options for many different types of flat roofs available from Orangery Roofs to Garden Rooms. Check our video below for a full breakdown of what to expect in your kit! (The information about the contents of your kit can be found on the product page on our website.)
For the most part each section of the installation is easy, Gluing the membrane down with both adhesives is very straightforward and securing the trims and clips to the perimeter is as well. Watch our video for a detailed step by step breakdown so you can follow along!
Choosing the right boards for your job can be daunting with many different options available to use for flat roof decking, however some are much more highly recommended than others, in our video below, Sam covers the key differences between the most commonly used boards, OSB3 and S-Grade Plywood.