External Corner Patch Uncured Tape

Size: 225mm (9“) x 300mm (12”) 

(Sufficient for most external corners with a 150mm upstand)

In stock
£7.70 £6.42

Delivery From £5 on Small Flat Roofing Materials.

Used For: Uncured formable EPDM for waterproofing external corners and profiles/cuts in the membrane

Other Items Required You will also require ClassicBond Rubber Primer and a paint brush or scrub pad (Not included with this item)

Installation Notes: Cut the Un-cured EPDM patch to size required. Apply rubber primer to area that will receive the EPDM patch and ensure touch dry. install patch and stretch to follow profile.

An Overview

SKU

CB-Corner-Patch-Ext

Stock Type

Warehouse Fulfilled

Width

225mm (9")

Brand Name

ClassicBond

Material

Un-cured EPDM Rubber

Color

Black

Videos
Downloads
Questions & Answers (5)

What is The Life Expectancy of EPDM Rubber Roofs?

EPDM Rubber roofs have a 50 year life expectancy.

EPDM has been in commercial use since the 1960s. And many of those roofs are still around today. 

How Long Does It Take To Install A ClassicBond Pro Roof?

This will depend on the current substrate, size and type of roof; along with if there is any detail work required such as skylights.

Our friends over at RoofScout have made a great video showing you exactly how long it takes to install ClassicBond Pro on a freestanding, timber-boarded summer house.

For Sam, it took him just under 2 hours and 15 minutes. He did install this roof alone and installed edge trims which make a difference to the installation time.

Check out RoofScout's video below.

How Long Does It Take To Install A ClassicBond Roof?

Generally, installing a ClassicBond roof can be a very quick job if you have basic knowledge about the preparation and the correct steps to take.

Some factors will affect the installation time such as the current substrate, size and type of roof; along with if there is any detail work required such as skylights.

Our friends over at RoofScout have made a great video showing you exactly how long it takes to install ClassicBond on a freestanding, timber-boarded log cabin.

For Sam, it took him just under a 1hour and 30minutes. He did install this roof alone and installed edge trims which make a difference to the installation time.

Check out RoofScout's video below.

Is Classicbond EPDM BBA Certified?

Yes. ClassicBond EPDM holds the British Board of Agrément certificate, No. 11/4853, issued to Flex-R Ltd. The BBA carries out assessment, testing, approval and certification of products and systems for the construction industry against national requirements, internationally recognized standards or other relevant technical specifications, reviewed and reissued every 3 years.

Fire Ratings

The ClassicBond system is also fire rated, the 1.2mm EPDM has a fire rating of EXT.F.AB and the 1.5mm EPDM membrane is fire rated to EXT.F.AA. Fire rating is carried out on a variety of deck surfaces and it is important to seek the certificate that relates most accurately to your roof structure.

What Temperatures Can A Rubber Roof Be Installed In?

We recommentd a minimum tempereture of 5 degrees C for EPDM installation. This is due the the WBA adhesive being water based and lower temperetures may cause the adhesive to freeze over and fail. 

You might want these instead
Back to top