GRP External Corner (C1)
GRP External Corner (C1)
The GRP External corner is a moulded hot pressed pre-formed external corner suitable for use with the kerb and drip profiles to form a left or right hand corner or raised edge corner between two raised edge trims.
Trim Fitting Instructions
- The corner should be nailed to the deck at each end and in the middle.
- The joins between the trim and the corner should be sealed with a thin line of PU trim adhesive, a moist finger can be used to wipe the adhesive, ensuring it seals the entire joint.
- The joint is then bandaged over. Tissue should be used to ensure a smooth finish.
An Overview
SKU |
PG-C1-Ext-Kerb |
---|---|
Stock Type |
Warehouse Fulfilled |
Material |
GRP |
You might want these instead
-
GRP fillet to Kerb Corner (C2)From: £13.20 £11.00
-
GRP Internal Fillet Corner (C3)£13.20 £11.00
-
GRP External Fillet Corner (C3)£13.20 £11.00