Horizontal Outlet 100mm
Horizontal Drain Water Outlet 100mm
Used For: EPDM Horizontal chute outlet is used to form a through wall outlet for dispersing water into a hopper or similar
Size: Requires Hole Size 105mm x 105mm
1) Install rubber membrane as per instructions.
2) Cut hole in membrane and slide horizontal outlet in to place.
3) Use 9" Elastoform tape to waterproof outlet on to rubber membrane
|Stock Type||Warehouse Fulfilled|
|Size||100mm x 100mm x 500mm|
EPDM Rubber roofs have a 50 year life expectancy.
EPDM has been in commercial use since the 1960s. And many of those roofs are still around today.
Yes, EPDM Membranes require the substrate to be dry prior to installation. This is so the the adhesive & primers can effectively bond the rubber to roof deck. EPDM products will not adhere to wet or damp surfaces. Trapped moisture may vaporize and negatively affect the performance of the membranes.
Yes. ClassicBond EPDM holds the British Board of Agrément certificate, No. 11/4853, issued to Flex-R Ltd. The BBA carries out assessment, testing, approval and certification of products and systems for the construction industry against national requirements, internationally recognized standards or other relevant technical specifications, reviewed and reissued every 3 years.
The ClassicBond system is also fire rated, the 1.2mm EPDM has a fire rating of EXT.F.AB and the 1.5mm EPDM membrane is fire rated to EXT.F.AA. Fire rating is carried out on a variety of deck surfaces and it is important to seak the certificate that relates most accurately to your roof structure.
We recommentd a minimum tempereture of 5 degrees C for EPDM installation. This is due the the WBA adhesive being water based and lower temperetures may cause the adhesive to freeze over and fail.