• Flat Roof Supplies to Trade and DIY
  •   Rated Excellent
  •   Secure Payments
  •   Price Promise

Flexitec 2020 Primer

Flexitec 2020 Primer is used to prime roof surface of board joints prior to the application of Flexitec 2020 Resin

Available in 2.5kg & 5kg tins 

In stock
£62.26 £51.88
Details

Flexitec 2020 Primer

Flexitec 2020 Primer is recommended for all porous, bituminous, cementitious, timber and PVC single ply substrates. IMPORTANT - Failure to prime porous surfaces, such as concrete, brickwork, tissue-faced insulation or plywood may result in an under-cure of the Flexitec 2020 resin and potential system failure.

GRP surfaces, including ResTrims, do not require priming. Application Conditions Flexitec 2020 Primer should be applied in dry conditions between 5°C and 30°C ambient air temperature. Do not begin if conditions could fall outside of the temperature range and/or if rain appears likely.

Flexitec 2020 Primer is applied at a coverage rate of 3.5 to 5.3m2/kg depending on surface roughness. Rough or highly porous surfaces will significantly reduce the coverage rate. All coverage rates are indicative only and it is your responsibility to ascertain the exact coverage rates on site.

IMPORTANT – A recommended additional 10% wastage should be factored into the figures below.

 

The Flexitec 2020 System by Res-Tec is a flexible, single resin GRP system with full overlay and new deck capabilities. Combining the best elements of fibreglass with the versatility of overlay systems, no other flat roof solution performs at this level across so many applications.

Please Note- HARDENER SOLD SEPARATELY. 

Technical Details
More Information
SKU FT-Primer
Stock Type Warehouse Fulfilled
Brand Name RES-TEC
Color Clear
Alternative Products
Supplier Member certified by NFRC
Feefo logo
We accept: Visa, Mastercard, Maestro, PayPal, Apple Pay and Google Pay