Shed Rubber Roof Kit - SkyGuard®
Sizes stated are of the actual membrane so your roof size needs to be slightly smaller.
Skyguard® Shed Rubber Roof Kit
The Skyguard EPDM rubber roof kit is a modern and attractive alternative to traditional felt. Supplied in one sheet the roofing system is easy to install and is perfect for sheds and outbuildings. With very low maintenance involved the shed rubber roof is very long-lasting and has a life expectancy of over 50 years.
Install the Skyguard EPDM rubber roof kit on your shed or outbuilding and have no more problems with leaks! Unlike other traditional roofing materials, the EPDM membrane is completely UV stable and will not tear or blister. The membrane is fully bonded to your shed or outbuilding roof deck and remains flexible for its entire life.
Easy & Quick Installation
The Skyguard rubber roof kit is super easy and quick to install. Designed with the homeowner or novice DIYer in mind, the shed roof kit is manufactured prejoined in one complete sheet, This means you wont have to do any joining onsite and makes the process of installation simple and easy.
The Skyguard® EPDM roof system will protect your home sheds, outbuildings, log cabins, garden studios and summer houses for their entire lifespan.
Advantages of Skyguard
- 50+ Year Life Expectancy
- Maintenance Free
- Rapid Fitting Times
- Will Not Tear, Split or Crack
- Clean and Easy To Install
- Lightweight Materials
- Supplied in One-Piece
- Attractive Finish
|Stock Type||Warehouse Fulfilled|
EPDM Rubber roofs have a 50 year life expectancy.
EPDM has been in commercial use since the 1960s. And many of those roofs are still around today.
All membranes do have manufactures joins as supplied to us. Depending on the spacing of the joins and the size of the piece being cut off the roll sometimes there is no manufacturers join in the membrane.
All EPDM membranes whether it is Firestone, ClassicBond or SKYGUARD have these joins and they are unavoidable, however, the big advantage is that it is supplied to you in one piece as our website states which means you don't have to do any onsite joins where workmanship could be a factor.
When applying this product to the deck perimeter ensure the edges of the membrane are lifted away from the area before applying a consistent amount of the product to the substrate.
Once the product is applied, allow the edge of the membrane to come into contact with the product. Use your hands to press the membrane into the product to ensure the membrane is secure.
It is important to check that the membrane is fully bonded around the perimeter before continuing to apply any timber cladding or trims.
Skyguard Water Based Deck Adhesive can be used straight out of the tub making it a great, no-nonsense product.
Install this product using a roller to ensure it is distributed consistently throughout the roof deck. We recommend purchasing our 100mm Mini Roller alongside this product for an easy application.
Yes, EPDM Membranes require the substrate to be dry prior to installation. This is so the the adhesive & primers can effectively bond the rubber to roof deck. EPDM products will not adhere to wet or damp surfaces. Trapped moisture may vaporize and negatively affect the performance of the membranes.
We recommentd a minimum tempereture of 5 degrees C for EPDM installation. This is due the the WBA adhesive being water based and lower temperetures may cause the adhesive to freeze over and fail.