9 Inch Elastoform Uncured EPDM Tape
Sold per linear metre not per roll
Please enter quantity required in linear metres, i.e. for a 4 metre length, please enter 4 in the quantity field
9 Inch Elastoform Uncured Tape
Used For: Designed to form internal / external corners / awkward features / pipes / penetrations / drain outlets and any other feature where the ability to stretch and form the material is required. 225mm uncured flashing can also be used to create an inexpensive pipe boot.
Installation Notes:The EPDM surfaces to receive the flashing must be dry, clean and free from dust and dirt. Wherever un-cured flashing tapes are to be used the surface must be primed with ClassicBond Rubber Primer and allowed to dry (touch dry), smooth side down!
|Stock Type||In Stock|
|Material||Uncured Synthetic Rubber|
|Delivery Lead Time||No|
EPDM Rubber roofs have a 50 year life expectancy.
EPDM has been in commercial use since the 1960s. And many of those roofs are still around today.
Yes, EPDM Membranes require the substrate to be dry prior to installation. This is so the the adhesive & primers can effectively bond the rubber to roof deck. EPDM products will not adhere to wet or damp surfaces. Trapped moisture may vaporize and negatively affect the performance of the membranes.
Yes, ClassicBond membrane holds the British Board of Agrément certificate, No. 11/4853 (issued to Flex-R Ltd). It also holds fire ratings for each of the thicknesses available.
We recommentd a minimum tempereture of 5 degrees C for EPDM installation. This is due the the WBA adhesive being water based and lower temperetures may cause the adhesive to freeze over and fail.