Water Based Deck Adhesive
ClassicBond Water Based Adhesive
This high strength low odour water based acrylic adhesive is specifically designed for use with ClassicBond EPDM roofing membrane to a range of deck surfaces. This product is designed to be applied with a medium roller direct to the timber flat roof surface.
ClassicBond WBA will bond ClassicBond EPDM membrane to a range of conventional timber roof surfaces e.g. plywood, OSB3. All boards should be resistant to moisture but not sealed with adhesive repellent waxes or other nonabsorbent systems. Certain roof surfaces may not be suitable for use with this adhesive, for example, non-porous such as metal or existing GRP, for these surfaces Contact Bonding Adhesive may be a more suitable alternative
Size: 2.5 Litres (Coverage 7 to 10 sqm)
Size: 5.0 Litres (Coverage 15 to 20 sqm)
Size: 15 Litres (Coverage 50 to 60 sqm)
You might also need
If you’re buying for a new roof or replacing an old one, you will need to consider the following components in your roof kit...
- Adhesives
- Tapes
- Drains
- Edge Trims
- Tools
SKU |
CB-WBA |
---|---|
Stock Type |
Warehouse Fulfilled |
Brand Name |
ClassicBond |
Color |
Cream/Cream |
Coverage |
See Additional Info |
What Products Will I Receive In My Rubber Roof Kit?
We sell a wide variety of EPDM rubber flat roofing kits to our customers and try to provide the widest possible selection, with options for many different types of flat roofs available from Orangery Roofs to Garden Rooms. Check our video below for a full breakdown of what to expect in your kit! (The information about the contents of your kit can be found on the product page on our website.)
Which Timber Boards Should I Use For My New Rubber Roof?
Choosing the right boards for your job can be daunting with many different options available to use for flat roof decking, however some are much more highly recommended than others, in our video below, Sam covers the key differences between the most commonly used boards, OSB3 and S-Grade Plywood.
How Long Does It Take To Install A ClassicBond Pro Roof?
This will depend on the current substrate, size and type of roof; along with if there is any detail work required such as skylights.
Our friends over at RoofScout have made a great video showing you exactly how long it takes to install ClassicBond Pro on a freestanding, timber-boarded summer house.
For Sam, it took him just under 2 hours and 15 minutes. He did install this roof alone and installed edge trims which make a difference to the installation time.
Check out RoofScout's video below.
How Long Does It Take To Install A ClassicBond Roof?
Generally, installing a ClassicBond roof can be a very quick job if you have basic knowledge about the preparation and the correct steps to take.
Some factors will affect the installation time such as the current substrate, size and type of roof; along with if there is any detail work required such as skylights.
Our friends over at RoofScout have made a great video showing you exactly how long it takes to install ClassicBond on a freestanding, timber-boarded log cabin.
For Sam, it took him just under a 1hour and 30minutes. He did install this roof alone and installed edge trims which make a difference to the installation time.
Check out RoofScout's video below.
Is Classicbond EPDM BBA Certified?
Yes. ClassicBond EPDM holds the British Board of Agrément certificate, No. 11/4853, issued to Flex-R Ltd. The BBA carries out assessment, testing, approval and certification of products and systems for the construction industry against national requirements, internationally recognized standards or other relevant technical specifications, reviewed and reissued every 3 years.
Fire Ratings
The ClassicBond system is also fire rated, the 1.2mm EPDM has a fire rating of EXT.F.AB and the 1.5mm EPDM membrane is fire rated to EXT.F.AA. Fire rating is carried out on a variety of deck surfaces and it is important to seek the certificate that relates most accurately to your roof structure.
What Temperatures Can A Rubber Roof Be Installed In?
We recommentd a minimum tempereture of 5 degrees C for EPDM installation. This is due the the WBA adhesive being water based and lower temperetures may cause the adhesive to freeze over and fail.
-
Rubber Roofing Contact AdhesiveFrom: £14.86 £12.38
-
ClassicBond EPDM PrimerFrom: £8.40 £7.00
-
9 Inch Elastoform Uncured EPDM Tape£24.42 £20.35
-
External Corner Patch Uncured Tape£7.70 £6.42
-
Russ Tape - Mechanical bonding£13.44 £11.20