Internal Corner Patch Uncured Tape
Size: 150mm (6“) x 225mm (9”)
Used For: Un-Cured EPDM patch for waterproofing internal corners and punctures
Other Items Required You will also require ClassicBond Rubber Primer and a paint brush or scrub pad
Installation Notes: Cut the patch to size required. Apply rubber primer to area that will receive the EPDM patch and ensure touch dry. install patch and apply pressure with seam roller.
|Stock Type||In Stock|
|Material||Un-cured EPDM Rubber|
|Delivery Lead Time||No|
EPDM Rubber roofs have a 50 year life expectancy.
EPDM has been in commercial use since the 1960s. And many of those roofs are still around today.
Yes, EPDM Membranes require the substrate to be dry prior to installation. This is so the the adhesive & primers can effectively bond the rubber to roof deck. EPDM products will not adhere to wet or damp surfaces. Trapped moisture may vaporize and negatively affect the performance of the membranes.
Yes, ClassicBond membrane holds the British Board of Agrément certificate, No. 11/4853 (issued to Flex-R Ltd). It also holds fire ratings for each of the thicknesses available.
We recommentd a minimum tempereture of 5 degrees C for EPDM installation. This is due the the WBA adhesive being water based and lower temperetures may cause the adhesive to freeze over and fail.