Flat Roof Breather Vent
Our Flat Roof Breather Vents are specifically designed as a means of ventilating insulated cold deck roof designs. They are suitable for use with almost all single ply and multi layer flat roof systems and provide essential airflow between the flat roof structure to reduce the build up of condensation and other forms of moisture which can occur in unventilated flat roofs.
You will also need 9 inch uncured elastoform tape with EPDM primer to form a water tight seal.
|Stock Type||In Stock|
|Size||75 x 270|
|Delivery Lead Time||No|
EPDM Rubber roofs have a 50 year life expectancy.
EPDM has been in commercial use since the 1960s. And many of those roofs are still around today.
Yes, EPDM Membranes require the substrate to be dry prior to installation. This is so the the adhesive & primers can effectively bond the rubber to roof deck. EPDM products will not adhere to wet or damp surfaces. Trapped moisture may vaporize and negatively affect the performance of the membranes.
Yes, ClassicBond membrane holds the British Board of Agrément certificate, No. 11/4853 (issued to Flex-R Ltd). It also holds fire ratings for each of the thicknesses available.
We recommentd a minimum tempereture of 5 degrees C for EPDM installation. This is due the the WBA adhesive being water based and lower temperetures may cause the adhesive to freeze over and fail.