Horizontal Outlet 100mm
Horizontal Drain Water Outlet 100mm
Used For: EPDM Horizontal chute outlet is used to form a through wall outlet for dispersing water into a hopper or similar
Size: Requires Hole Size 105mm x 105mm
1) Install rubber membrane as per instructions.
2) Cut hole in membrane and slide horizontal outlet in to place.
3) Use 9" Elastoform tape to waterproof outlet on to rubber membrane
|Size||100mm x 100mm x 500mm|
|Delivery Lead Time||No|
EPDM Rubber roofs have a 50 year life expectancy.
EPDM has been in commercial use since the 1960s. And many of those roofs are still around today.
Yes, EPDM Membranes require the substrate to be dry prior to installation. This is so the the adhesive & primers can effectively bond the rubber to roof deck. EPDM products will not adhere to wet or damp surfaces. Trapped moisture may vaporize and negatively affect the performance of the membranes.
Yes, ClassicBond membrane holds the British Board of Agrément certificate, No. 11/4853 (issued to Flex-R Ltd). It also holds fire ratings for each of the thicknesses available.
We recommentd a minimum tempereture of 5 degrees C for EPDM installation. This is due the the WBA adhesive being water based and lower temperetures may cause the adhesive to freeze over and fail.