Flexitec 2020
Res-Tec Flexitec 2020 GRP Roofing
The Res-Tec Flexitec 2020 System combines the best elements of fibreglass with the versatility of overlay systems.
Similar to both GRP fibreglass and liquid overlay systems, it is rapid-curing, flexible and designed to coat almost all roof surfaces. Whether using over felt, asphalt, concrete, GRP, PVC single-ply, metal or approved insulation boards, there will be no need to strip the roof of its existing material, instead, the roof can simply be overlaid with Flexitec 2020.
With its rapid curing abilities and providing an extra-tough finish, Flexitec 2020 can be walked over in just 30-60 minutes.
- 35-year life expectancy
- Heat and frost resistant
- Seamless finish
- Permanently flexible
- Suitable for foot traffic
- UV resistant
- Low maintenance
- Rapid curing
- Overlaying capabilities
- Easy to repair
- LABC certified
Flexitec 2020 can be repaired or overcoated without grinding down if applied as a one-coat (10-year repair system) or two coat (20-year roofing system) system.
Installations by trained installers of the two-coat system are supported by Res-Tec’s trusted 20-year materials guarantee.
Highly flexible, Flexitec 2020 is designed for any size or shape roof without the need for expansion joints.
Flexitec 2020 is suitable for application in temperatures as low as 5°C (0°C using accelerator) and as high as 30°C and is a totally seamless membrane – no joints, no welds, no weak points.
Fire tested to BS 476-3 Rating: F.AA and EN 13501-5(4) Rating: BROOF(t4) – the highest rating a flat roof system can achieve and allowing for unrestricted use under UK regulations.
The Flexitec 2020 system can be repaired or overcoated without grinding down. If applied as a one coat (10-year repair system) or two coat (20-year roofing system) system. Installations by trained installers of the two-coat system are supported by Res-Tec’s trusted 20 year materials guarantee.
Flexitec 2020 is highly flexible and suitable for any size or shape roof without the need for expansion joints. This is suitable for application in temperatures as low as 5°C (0°C using accelarator) and as high as 30°C and is a totally seamless membrane – no joints, no welds, no weak points.