Cromar Pro GRP Top Coat
Cromar PRO GRP Topcoat is a low odour, pre-accelerated resin specifically formulated for roofing applications.
Cromar PRO GRP Topcoat is a dark grey, pre-pigmented, isophthalic acid based, filled fire-retardant
CROMAR PRO GRP Topcoat is recommended for use in flat roofing applications especially where regultions specify a fire-retardant system.
CROMAR PRO GRP Topcoat is designed for roller application which exhibits good levelling characteristics and sag resistance on inclined surfaces. The cured top-coat is tack-free and watertight with excellent water and weather resistance providing a maintenance-free surface.
Conforms to BS476 Part 3:2004, FAB classification. When applied at a wet film thickness of 500 – 600 microns and fabricated with a single ply of 450 grams per square metre of emulsion bound chopped strand mat, consolidated with the optimum quantity of an orthophthalic acid based general purpose laminating resin onto 18 mm OSB3 grade board.
- 5KG Tin - 11 sqm (Allowing 10% waste)
- 10KG Tin - 22 sqm (Allowing 10% waste)
- 20KG Tin - 44 sqm (Allowing 10% waste)
|Stock Type||In Stock|
|Coverage||0.5Kg/m2 (0.45kg/m2 Allowing 10% Waste)|
|Delivery Lead Time||No|
If Installed Correctly a Fibreglass roof has a typical life expectancy in access of 35yrs
Fibreglass roofs must always be laid onto new and dry OSB3 boards. For best results we recommend using tongue and groove boards.
Yes. Fibreglass is a very tough and durable material. This means walking on your roof shouldn't affect the integrity of the roof
Yes, Never Attempt to install a Fibreglass Roof onto wet or damp boards.
The minmum temperature for installing a fibreglass roof is 5 degrees C.