Atlas Bespoke Flat Glass Skylight
Dont need a bespoke size? Save money by buying a standard size Atlas skylight
Please ensure all measurements supplied are in mm and external. i.e. measured from the outside edge of the existing upstand
Atlas Made to Measure Flat Glass Skylight
Creating the illusion of open roof space, the minimalistic external and internal sightlines creates a sleek, modern appearance and is a stunning addition to any home extension. The atlas flat glass skylight is perfect for flat roof extensions or homes where a lantern isn’t approved due to height restrictions.
Custom Made for Your home
Our Atlas roof lights are made bespoke to your exact sizes and can even be manufactured to any ral colour. This means that your roof light will be perfectly suited to your room and not just an off the self after thought.
The minimalistic contemporary external design with flush glazing gives a sleek, modern appearance and is a stunning addition to any home extension.
Sitting flush with the internal plaster line, the fixed flat roof light appears frameless from the interior of the home, creating the illusion of an open roof space.
Ultimate Thermal Performance
The unique aluminium external and internal capping and bespoke structural PVCu internal core make the Atlas Flat Glass the ultimate glazed flat roof light.
If you’d like more information on the Atlas Made to Measure Flat Glass Skylight, call our expert team on 024 76 707700 and we’d be happy to answer any questions you may have.
Atlas Flat Rooflight's unique aluminium external and internal capping combined with a bespoke structural PVCu internal core means it is not only the best looking rooflight but also the best double glazed thermal performing flat rooflight on the market.
- Overall U value (double glazing and frame) 1.3 w/m²k
- Structural PVCu internal core with superior thermal properties
Creating the appearance of open roof space, the minimalistic external and internal sight lines creates a sleek, modern appearance. It is a stunning addition to any home, building or extension. The Atlas Rooflight is the best glazed rooflight designed to illuminate any home.
- Hidden direct fixing and strap fixing alternative
- Internal plasterboard pocket for easy boarding and plastering
- Clip in external weather bar and internal cover trim
- Weather resistant - 5 degree pitched kerb allowing the water to drain off the glazing unit unto the existing flat roof
- Optional Insulated kerb upstands available to purchase
- Standard toughened double glazed spec - 6mm Clear outer /16mm gas/6mm Clear inner
- Low maintenance
- Solar control glass options available
- Manufactured and kitemarked to BS EN 1279-2 and toughened to BS EN 12150-
- 10 year seal and easy clean coating warranty
- Minimal external and internal sightlines
Please note all bespoke products are manufactured to customers specified sizes and therefore will be excluded from our standard returns policy
|Frame Colour||White, Black, Grey|
|Thermally Broken Frame||Yes|
|Skylight Style||Flat Glass|
|Kerb Options||No Kerb|
|Trickle Vents||No Vent Options|
|Glazing Tint||Clear, Blue, Neutral|
|Glass U-Value||1.0 W/m2K|
|Delivery Lead Time||No|
Our Atlas Flat glass skylight is custom made to your exact sizes. We work from external measurements and always recommend an 80mm wide upstand is used.
To calculate your required size, measure the length and width from the outside edge of your timber upstand, As shown in the image.
Please note all Atlas Flat Glass skylight come with a 6mm overhang to allow for roof finish and are manufactured within a 2mm tolerance.
If you have a roof opening but Upstands are not built yet.
<easure the length and width of your roof opening and add 160mm to both dimensions to allow for your upstands. This will give you the external dimension of your roof light.
The Atlas Flat Glass is supplied fully assembled making it quick and easy to install. The Skylight is placed on to a preassembled 80mm upstand using a bead of silicone to create a water tight seal. The Skylight is then fixed into place using screws that go through the skylight into the upstand. Finally the outer trims and applied. For further details be see our Atlas installation guide.
Yes, All Atlas skylights are fully Compliant to Part L Building regulations
Low e-solar glass has a special coating which reflects heat back to the source. This means your room will stay warm in the winter and cool in the summer
On Paper Triple Glazed roof lights are the ideal choice for modern homes and can offer u-values as low as 0.6 W/m²K. However, opinion is divided on whether triple glazing has any real thermal impact in the home. Quite often they do very little to reduce your utility bills and the initial costs far outweigh any savings.
A thermal break is a layer of low conductive material placed in the Aluminium frame of a skylight. This stop the internal side of the frame becoming cold and in turn eliminates condensation occurring internally on the frame.
Yes, The Atlas Skylight range can be custom made to your required sizes
The largest size available without the need for a strengthening bar is 3000mm x 1200m. Larger sizes may be available with a different glass spec or by using strengthening bars. Please call 02476 707700 for more info
We recommend a minimum 5 degrees pitch to allow water to run off and prevent pooling on your new skylight. This can be achieved by creating a height difference in the installed upstand. Alternatively an Atlas composite upstand can be bought with the pitch already built in.
Atlas Roof lights can be manufactured to any ral colour. However there are three standard colours which are available at no extra cost. You can also specify different colours internally and externally.
Anthracite Grey (7016),
Batt Black (9005),
Satin White (9010)
Atlas roof lights are available in either Standard clear or a choice of two Low-e Self-cleaning glass options. Neutral and Active Blue. All are manufactured to a thickness of 28mm(6-16-6) with toughened glass and a u-value of 1.0 W/m2K.