Universal GRP Expansion Trim
SkySeal GRP Expansion Trim can be used as a decorative finish or to waterproof an expansion gap in roof deck on roofs over 50sqm.
SkySeal Universal GRPExpansion Trim
The Expansion Trim is used either as a decorative finish to simulate a lead mop roll or over the top of an expansion gap in roof deck. We advise using expansion gaps on GRP roofs over 50 square metres in size. 25mm gaps should be made in the roof deck boards and the E280 trim fitted over the top using PU trim adhesive and pins to hold it in place prior to installing the GRP matting and resin.
This is a Glass Reinforced Polyester flat roof system designed and engineered for flat roof applications. Fully integrated all in one system where the components work together on virtually all types of flat roofs and vertical surfaces in any domestic or commercial application to provide the perfect all weather protection.
A single batten should be fixed on to the outside fascia board level with the top edge of the deck. Cromar PU adhesive should be applied to the battens in 30mm beads.
- Cold applied - No heat needed
- Easy to form
- Durable - Resists heavy foot traffic
- Virtually maintenance free
- Impact resistant
- Fire retardant
- Storm proof
- Frost proof
- Length : 3 metres
- Width : 110 mm
- Raised Height: 35 mm
- Height : 125 mm
|Delivery Lead Time||No|
If Installed Correctly a Fibreglass roof has a typical life expectancy in access of 35yrs
Fibreglass roofs must always be laid onto new and dry OSB3 boards. For best results we recommend using tongue and groove boards.
Yes. Fibreglass is a very tough and durable material. This means walking on your roof shouldn't affect the integrity of the roof
Yes, Never Attempt to install a Fibreglass Roof onto wet or damp boards.
The minmum temperature for installing a fibreglass roof is 5 degrees C.