Universal GRP Raised Edge Trim
SkySeal Universal Raised edge trims are used on the non-drainage side if the roof, overlapping on to the fascia.
SkySeal GRP Rasied Edge Trim
The raised edge trims is placed on the non-draining open edges of a roof, overlapping onto the fascia boards. A single batten should be fixed on the outside of the fascia board level with the top edge of the deck. PU trim adhesive should be applied to the battens in 30mm beads at 300mm centres before bedding the trim.
This is a Glass Reinforced Polyester flat roof system designed and engineered for flat roof applications. Fully integrated all in one system where the components work together on virtually all types of flat roofs and vertical surfaces in any domestic or commercial application to provide the perfect all weather protection.
A single batten should be fixed on to the outside fascia board level with the top edge of the deck. PU adhesive should be applied to the battens in 30mm beads.
- Cold applied - No heat needed
- Easy to form
- Durable - Resists heavy foot traffic
- Virtually maintenance free
- Impact resistant
- Fire retardant
- Storm proof
- Frost proof
- Length : 3 metres
- Width : 110 mm
- Raised Height: 35 mm
- Height : 125 mm
|Delivery Lead Time||No|
If Installed Correctly a Fibreglass roof has a typical life expectancy in access of 35yrs
Fibreglass roofs must always be laid onto new and dry OSB3 boards. For best results we recommend using tongue and groove boards.
Yes. Fibreglass is a very tough and durable material. This means walking on your roof shouldn't affect the integrity of the roof
Yes, Never Attempt to install a Fibreglass Roof onto wet or damp boards.
The minmum temperature for installing a fibreglass roof is 5 degrees C.