Skyseal | Flat Glass Fixed Rooflight
SkySeal Aluminium fixed Rooflight
High Quality With Fast Delivery
Our SkySeal Skylight offers a competitively priced glass roof light without compromising quality. Offered in a range of sizes the Skyseal Glass roof light is available on a 3-4 working day lead time* and boasts a superb part ‘L’ compliance.
The sleek contemporary design achieves maximum daylight due to the minimalistic framework finish which barely visible from the internal of the building, the units are very easy to install and require very little maintenance other than periodic cleaning.
With a centre pane U-value of 1.1 W/m2K the Skyseal Flat Glass is one of the most thermally efficient double glazed roof lights in the market.
Glass Spec: 32.4mm Overall (1.1 W/m2K)
- 6mm toughened outer,
- 20mm 90% Argon filled cavity
- 6.4 mm laminated soft coat Low E inner
Easy & Quick to Install
The Skyseal Glass Rooflight can be installed on a minimum 2° fall and offers a universal daylight solution for both residential and commercial projects. Fixing to a prepared upstand the unit is primarily a sleeve over installation.
Advantages over traditional systems:
- Sleek design
- Speedy delivery
- Thermally efficient
- Exceptional U values
- High-performance impact-resistant glass
- Factory sealed units
- Environmentally friendly (all components are recyclable)
- Competitively priced
*Please note for rooflights sized 1000mm x 2000mm the lead time is 4-6 working days
|Stock Type||Made to Order|
|Thermally Broken Frame||Yes|
|Skylight Style||Flat Glass|
|Kerb Options||No Kerb|
|Trickle Vents||No Vent Options|
To suit your own Builders upstand
When Purchasing a Glass unit without un upstand please ensure the outside edge of your ouw timber upstands are positioned at the same distance as you chosen skylight size. For example if you have a rooflight which measures 900mm x 900mm, you need to ensure the the measurement from the out side edge of your upstand is the same. Please see image for further clarification. A 75mm wide upstand is recommended
Skylight with UPVc Upstand
When purchasing a Glass unit with a UPVc upstand the stated sizes represent the opening in the roof. Please ensure the opening in the roof is the same size as the purchased skylight. FOr example if your skylight is 750mm x 750mm the opening in the roof also needs to be 750mm x 750mm.
Low e-solar glass has a special coating which reflects heat back to the source. This means your room will stay warm in the winter and cool in the summer
On Paper Triple Glazed roof lights are the ideal choice for modern homes and can offer u-values as low as 0.6 W/m²K. However, opinion is divided on whether triple glazing has any real thermal impact in the home. Quite often they do very little to reduce your utility bills and the initial costs far outweigh any savings.
A thermal break is a layer of low conductive material placed in the Aluminium frame of a skylight. This stop the internal side of the frame becoming cold and in turn eliminates condensation occurring internally on the frame.
We recommend a minimum 5 degrees pitch to allow water to run off and prevent pooling on your new skylight. For self cleaning glass to work effectively a minimum 10 degree pitch is recommended.
This can be achieved by creating a height difference in the installed upstand. Alternatively an Atlas composite upstand can be bought with the pitch already built in.