Skyseal | Flat Glass Opening Rooflight
SkySeal Opening Aluminium Rooflight
High Quality With fast Delivery
Our SkySeal Skylight offers a competitively priced glass roof light without compromising quality. Offered in a range of sizes the Skyseal Glass roof light is available on a 5-7 working day lead time and boasts a superb part ‘L’ compliance.
Natural Light with Added Ventilation
The SkySeal Flat Glass opens to a maximum of 300mm to increase ventilation and allow fresh air to flow through your home. The choice of both manual and powered opening options are available.
Minimalist Design
The sleek contemporary design achieves maximum daylight due to the minimalistic framework finish which barely visible from the internal of the building, the units are very easy to install and require very little maintenance other than periodic cleaning.
Thermally efficient
With a centre pane U-value of 1.1 W/m2K the Skyseal Flat Glass is one of the most thermally efficient double glazed roof lights in the market.
Glass Spec: 32.4mm Overall (1.1 W/m2K)
- 6mm toughened outer,
- 20mm 90% Argon filled cavity
- 6.4 mm laminated soft coat Low E inner
Easy & Quick to Install
The Skyseal Glass Rooflight can be installed on a minimum 2° fall and offers a universal daylight solution for both residential and commercial projects.
Install this rooflight onto your prepared upstand or purchase a 150mm PVC kerb for a super quick and easy installation.
Why Is An Aluminium Frame Important?
Added Structural Strength
Our highly-developed Aluminium frame provides extra strength and rigidity, minimising structural movement in the skylight once installed, which significantly reduces the chances of failure.
Extra Damage Protection
The aluminium frame acts as a protective layer, encapsulating the glass at its weakest points to prevent accidental damage that would otherwise shatter the glass.
Enhanced Home Security
Provides added security attributed to its tamper-proof fixings accompanied by a strong silicone sealant.
Extra Glass Support
The frame is key in providing extra support to the glass, ensuring the glass stays in place in the event of damage or shattering.
Advantages:
- Sleek design
- Speedy delivery
- Thermally efficient
- Exceptional U-values
- High-performance impact-resistant glass
- Factory sealed units
- Environmentally friendly (all components are recyclable)
- Competitively priced
- Available with a 150mm PVC kerb
SKU |
SL-Skyseal-Flat-Glass-Opening |
|---|---|
Stock Type |
Made to Order |
Frame Material |
Aluminium |
Frame Colour |
Black, Grey |
Thermally Broken Frame |
Yes |
Overall U-Value |
1.25W/m2K |
Brand Name |
Skyseal |
Skylight Type |
Manual Opening, Powered Opening |
Skylight Style |
Flat Glass |
Kerb Options |
No Kerb, Standard Kerb (150mm) |
Trickle Vents |
Optional Vents |
Opening Control Unit |
Pole, Rocker Switch, Wireless Remote, Wireless Remote & Rain Sensor |
Glazing Material |
Glass |
Glazing Tint |
Clear |
Glass Thickness |
32.4mm |
Glass U-Value |
1.1W/m2K |
Warranty |
10 yrs |
-
Data Sheet SkySeal Flat Glass
-
Installation Guide For Skyseal Powered Opening Flat Glass Rooflight
Information on installation for powered opening roof light on a builder's upstand and PVC kerb. Details of installation for electrical connections, wall switch, remote control and rain sensor. -
Skyseal Flat Glass MLD Installation Guide
-
SkySeal Flat Glass PCDRS Installation Guide
How do I choose the correct size Glass skylight?
To suit your own Builders upstand
When purchasing a Glass unit without an upstand, please ensure the outside edge of your own timber upstands are positioned at the same distance as you chosen skylight size. For example, if you have a rooflight which measures 900mm x 900mm, you need to ensure the measurement from the outside edge of your upstand is the same. Please see image for further clarification. A 75mm wide upstand is recommended.
Skylight with UPVc Upstand
When purchasing a Glass unit with a UPVc upstand, the stated sizes represent the opening in the roof. Please ensure the opening in the roof is the same size as the purchased skylight. For example, if your skylight is 750mm x 750mm, the opening in the roof also needs to be 750mm x 750mm.
Which side will the hinges appear on the Rooflight?
The hinges will appear on the longest length of the rooflight.
What is Low-e Solar Glass?
Low-e solar glass has a special coating which reflects heat back to the source. This means your room will stay warm in the winter and cool in the summer
Do I really need Triple Glazing?
On paper, Triple Glazed roof lights are the ideal choice for modern homes and can offer U-values as low as 0.6 W/m²K. However, opinion is divided on whether triple glazing has any real thermal impact in the home. Quite often they do very little to reduce your utility bills and the initial costs far outweigh any savings.
What is a Thermal Break?
A thermal break is a layer of low conductive material placed in the Aluminium frame of a skylight. This stops the internal side of the frame becoming cold and in turn eliminates condensation occurring internally on the frame.
What is the recommended pitch for a Flat Glass skylights?
We recommend a minimum 5 degree pitch to allow water to run off and prevent pooling on your new skylight. For self cleaning glass to work effectively, a minimum 10 degree pitch is recommended.
This can be achieved by creating a height difference in the installed upstand. Alternatively, an Atlas composite upstand can be bought with the pitch already built in.
What is a U-value?
Thermal transmittance, also known as U-value, is a measure of heat loss through the structure. It is measured in W/m2K. The lower the value, the better the insulation.
The UK Building Regulations require a maximum of 2.2 W/m2K in existing dwellings and an average of 1.2 - 1.7 W/m2K for new dwellings on rooflights.
-
Atlas | Bespoke Traditional Roof Lantern£1,192.80 £994.00 -
Mardome Trade | Roof Light Dome£134.40 £112.00 -
Skyseal | Flat Glass Fixed Rooflight£360.00 £300.00 -
Atlas | Bespoke Contemporary Roof Lantern£954.00 £795.00
