12 Inch Elastoform Uncured EPDM Tape

12" Elastoform Uncured Tape

Sold per linear metre not per roll - Please enter quantity required in linear metres, i.e. for a 4 metre length, please enter 4 in the quantity field.

In stock
£38.94 £32.45

Delivery From £15 for all Standard Flat Roofing Materials.

12" (300mm) Elastoform Uncured Tape

Used For: Designed to form internal / external corners / awkward features / pipes / penetrations / drain outlets and any other feature where the ability to stretch and form the material is required. 300mm uncured flashing can also be used to create an inexpensive pipe boot.

Installation Notes:The EPDM surfaces to receive the flashing must be dry, clean and free from dust and dirt. Wherever un-cured flashing tapes are to be used the surface must be primed with ClassicBond  Rubber Primer and allowed to dry (touch dry), smooth side down!

An Overview

SKU

CB-Tape12

Stock Type

Warehouse Fulfilled

Width

225mm (9")

Brand Name

ClassicBond

Material

Uncured Synthetic Rubber

Color

Black

Questions & Answers (4)

My roof has a small hole which is causing a leak, how easy is it to repair this?

One of the most evident benefits of EPDM rubber roofing is that it can be repaired very quickly and easily, allowing you to catch a problem before it turns into something much bigger! Supplied as a 6 inch strip, any small hole or rip can be sealed effectively with our repair patch kits. This easy-to-use patch, primer and brush combination will ensure you can safely patch any minor damage to the roof.
Link to the kit here!

Can EPDM Withstand Hard Impacts From Outside Conditions? Such As Branches Falling On It Or A Bird Pecking On It?

Along with a life expectancy of 50 years and beyond, EPDM rubber can stand up to quite some force from outside elements, in our video below we explore what different objects falling on the rubber will do to it and how much damage it takes to actually penetrate the membrane! Prepare to be surprised!

Why Have Bubbles Appeared On The Edge Of My Newly Laid EPDM Rubber Roof?

Occasionally, bubbles and blisters can appear around the perimeter of the EPDM rubber roof just after it's been fitted. There are a few reasons why this can happen, the Contact Adhesive could have been applied too thick, or if it has not been allowed enough time to properly tack-off. Luckily we can share a few tips to help avoid this potential problem, check our video for an in-depth explanation.

How Long Does It Take To Install A ClassicBond Roof?

Generally, installing a ClassicBond roof can be a very quick job if you have basic knowledge about the preparation and the correct steps to take.

Some factors will affect the installation time such as the current substrate, size and type of roof; along with if there is any detail work required such as skylights.

Our friends over at RoofScout have made a great video showing you exactly how long it takes to install ClassicBond on a freestanding, timber-boarded log cabin.

For Sam, it took him just under a 1hour and 30minutes. He did install this roof alone and installed edge trims which make a difference to the installation time.

Check out RoofScout's video below.

You might want these instead
Back to top