GRP Flat Trim (F300)
GRP Flat Flashing Trim (F300)
The GRP flat flashing trim is a versatile flat section of GRP that can be used to clad surfaces prior to top coating and can be used where a pitched roof meets the flat roof surface. PU trim adhesive should be applied and the trim held in place with pins prior to matting.
This is a Glass Reinforced Polyester flat roof system designed and engineered for flat roof applications. Fully integrated all in one system where the components work together on virtually all types of flat roofs and vertical surfaces in any domestic or commercial application to provide the perfect all weather protection.
A single batten should be fixed on to the outside fascia board level with the top edge of the deck. Cromar PU adhesive should be applied to the battens in 30mm beads.
- Cold applied - No heat needed
- Easy to form
- Durable - Resists heavy foot traffic
- Virtually maintenance free
- Impact resistant
- Fire retardant
- Storm proof
- Frost proof
- Length : 5 Meters
- Width : 300mm
How Long Does a GRP Fibreglass roof Last?
If Installed Correctly a Fibreglass roof has a typical life expectancy in access of 35yrs
What Surface can a Fibreglass roof be Installed onto.
Fibreglass roofs must always be laid onto new and dry OSB3 boards. For best results we recommend using tongue and groove boards.
Can I Walk on a fibreglass roof?
Yes. Fibreglass is a very tough and durable material. This means walking on your roof shouldn't affect the integrity of the roof
Does if have to be dry for me to install a Fibreglass Roof?
Yes, Never Attempt to install a Fibreglass Roof onto wet or damp boards.
What is the minimal temperature i can install a Fibreglass roof in?
The minmum temperature for installing a fibreglass roof is 5 degrees C.